Friday, March 30, 2012

DI System Shipping to Washington Chemical Plant

Shipping today is a two bed (cation ion exchange tank followed by an anion ion exchange tank) demineralizer for a chemical plant in Washington State. This unit is a DI60072 and will be used in parallel with several other older systems currently installed at the same plant to increase treated water capacity.
A 150 GPM demineralizer that shows a nema 4x control panel that has panel view 300 hmi
150 gpm Demineralizer Showing NEMA 4X Control Panel with Panel View 300 HMI
The system will use the existing bulk acid and caustic for regeneration of the cation resin and anion resin respectively.
150 GPM demineralizer with a compact design of piping
150 gpm Demineralizer Compact Design of Piping
System Design:

Normal Service Flow Rate:
150 gpm
Maximum Service Flow Rate:
230 gpm
Vessel Size:
60" x 72" Diameter x Straight side
Volume of Cation (SAC) Resin
66 cu ft
Volume of Anion (Type 1) Resin
77 cuft
Cation Vessel Internals:
Header Lateral Design PVC Schedule 80
Anion Vessel Internals:
Header Lateral Design 316L SS Schedule 10
Automatic Valves:
Butterfly valves 316L SS disc with Air to Open Spring to Close Actuators
Controls:Allen Bradley Micrologix PLC
Panelview 300 HMI
NEMA 4X FRP panel
Instrumentation:
Signet Flow meter Totalizer
Thornton Conductivity Meter

Additional Information:
For our complete demineralizer/deionizer product line.
For help sizing a DI system, please contact us.

Friday, March 23, 2012

Downloadable Catalog of Water Treatment Equipment Updated

For 2012, we updated our downloadable industrial water treatment catalog.  (Given the number of equipment choices we provide, the catalog file is very large, so please be patient during the download.)


The Reskem Catalog for Industrial Water Treatment Equipment
Res-Kem's Industrial Water Treatment Equipment Catalog for 2012
 In addition to the updated XL, CL and ML Series RO system bulletins list in my previous post, we have updated the two bed demineralizer sections of our catalog to include all of the standard sized DI systems up to 96" in diameter.

To many water treatment system choices?  Contact us for help!

Friday, March 16, 2012

Industrial RO System Information Updated

Bulletins on the RO systems Res-Kem provides have been updated. These bulletins include the most up to date standard and custom features of the XL, CL, and ML series RO systems.

Reverse Osmosis Systems
TypeSingle System Capacity*ControllerFile
Res-Kem XL RO Systems9,650-698,400 GPD (6.7-485 GPM)Allen Bradley PLC with Panelview Touchscreen HMIRes-Kem XL RO Brochure
Res-Kem CL RO Systems3,150-22,300 GPD (2.1-15.5 GPM)Allen Bradley PLC with Panelview Touchscreen HMIRes-Kem CL RO Brochure
Res-Kem ML RO Systems1,050-8,380 GPD (0.7-5.8 GPM)Digital MicroprocessorRes-Kem ML RO Brochure
* If you have required flow rates above those listed in each category, multiple units can be used.
Res-Kem XL Series RO Systems

Contact us for Help:

Wednesday, March 14, 2012

Condensate Polisher "Portfolio" Added

A sodium cycle condensate polisher "portfolio" page was added to the Res-Kem website.  As you have seen, I have used this blog to highlight the systems we have designed, manufactured and shipped to companies throughout North America.  Given the large number of systems we have manufactured, a consolidated list of these systems would be helpful rather than hunting through the blog. 

As you will see, Res-Kem has a base standard design that we have customized to meet the requirements of their facility or process.  Contact us if you want more information on a specific system you see or one you are contemplating.  I will add detailed information on each system in the coming weeks.  Also, I will continue to update this page with new systems we have sold.

Monday, March 12, 2012

Water Softener vs. Condensate Polisher – Knowing the Differences Can Help you "Get Greener"

Many companies are on a constant quest to run their business in the most energy-conscious, money-saving way possible. For those whose operations involve a low-pressure boiler system environment, investing in a condensate polisher is one of the easiest ways to “get greener” through energy efficiency and dollar savings.

In most every boiler plant, cold water softeners are used to treat boiler water makeup. What’s less common is the use of a condensate polisher which treats condensate return for resuse as boiler feedwater. There are several differences between a water softener and a condensate polisher. Let’s look at a few:

Water Softener vs. Condensate Polisher
Installion – a water softener is typically installed “upfront” with the boiler system in order to meet the ASME/manufacturer’s water quality specifications. A condensate polisher is often an “add-on” to an existing boiler system once steam traps, condensate piping, and condensate receivers age and form deposits (such as iron, copper, and magnesium) that cause thermal resistance to drop.

Materials of construction – water softeners are constructed of epoxy coated tanks or poly-lined FRP tanks, with cast iron or PVC valves and black iron or PVC piping. Res-Kem’s standard condensate polisher systems are fabricated completely with stainless steel. This all stainless steel construction is the best material choice for safe operation over a long time.

Temperature & flow rate – condensate polishers are built to operate at a much higher temperature and flow rate. Where water softeners operate below 80 degrees F, polishers operate substantially above 120 degrees F. The higher temperature and flow rate allow a polisher to acts as both an ion exchange device AND filter, removing copper and iron oxides that cause scale buildup. This oxide removal is not possible with a water softener system, which act only as an ion exchange device with limited filtering capabilities.

Stainless steel surface preparation – condensate polishers are passivated. After fabrication, to further enhance the corrosion resistance of our stainless steel components, all of our welded stainless steel piping and tanks are passivated. This is an expensive, multi-step process which includes bead blasting and passivation, for the longest condensate polisher life.

So what do all these differences ultimately mean for a customer who invests in a condensate polisher?

1) Fuel savings – a condensate polisher saves fuel by allowing higher boilerwater cycles of concentration by reducing the Fe and Cu oxides that cause scale buildup. Fuel savings is also realized through the reuse of heat in the steam condensate.

2) Reduced chemical usage – because of the reduction of oxides and scale buildup in the steam loop, less investment is needed in internal boiler treatment chemicals that are used to remove buildup.

3) Longer and safer service life – a condensate polisher’s passivated, stainless steel construction ensures optimal operation for many years, with minimal routine maintenance. The typical life expectancy of a condensate polisher is 10-20 years.

Learn more about the customizable standard features and specifications of eight of Res-Kem’s recently manufactured condensate polisher models. Download our brochure today, then give us a call to see how we can help you “get greener” with more energy efficiency and more money in your pocket.

Friday, March 09, 2012

Condensate Polisher Product Bulletin Updated

Res-Kem has updated the features list of our standard condensate polisher product line because we had important ones which we did not tell anyone about!

For example:
  • All of the welded stainless steel piping and tank components have always used the expensive and necessary bead blasting and passivation, for long condensate polisher system life
  • All our stainless steel piping is welded per ASME Section IX
  • All our laterals use wedge wire screeening
One of Reskem's Alternating 48
Duplex Alternating 48" Condensate Polisher
with Optional Bray Valves

stainless steel header with wedge wire lateral distributors
Stainless Steel Header & Wedge Wire Lateral Distributors
Installed Above
Stainless Steel Hub & Wedge Wire Laterals
Also, one common option customers have asked for is to provide stainless steel headers.  For most multiple unit systems we have sold, we have provided the inlet, outlet, brine, sub-surface wash and drain headers.  We needed to add this information to the bulletin as well.

Additional Information:
New Condensate Polisher Bulletin

Friday, February 24, 2012

400 gpm Multi-Media Filters Shipped to Brewery in Pennsylvania

Res-Kem shipped a dual alternating multi-media to a brewery in northeastern Pennsylvania.  The each multi-media vessel has a design flow rate of 400 gpm and a peak flow rate of 510 gpm.  The system filters all the municipal water entering the plant for all applications including brewing.   

Two 84 inch diameter multi media filters
Dual 84" Diameter Multi-Media Filters
Design Features:
  • Two 84" diameter ASME code vessels rated at 100 psig.  The internal coating is an FDA epoxy
  • Aquamatic diaphragm are used
  • External piping is Schedule 80 black iron pipe
  • Each filter is controlled using an Aquamatic 948 controller which backwashes on a time basis
multi media filter from a close up perspective right before shipment
Closeup of Multi-Media Filter Before Shipment

For additonal information:

Res-Kem's Multi-Media Filter System Bulletin
Res-Kem's Complete Media Filtration Product Line
Need technical assistance and/or system pricing?

Friday, February 10, 2012

Three Duplex 80 gpm Multi-Media Filters Ready for Shipment

Res-Kem is has delivered 20 of the 40 customized, duplex multi-media filters for mobile enhanced oil recovery trailers. The Res-Kem multi-media filters are sized to continuously produce 80 gpm of water to downstream equipment including steam generators.  The trailers generate steam which is injected into wells to recover more oil. The system started out as one of our customizable standard duplex multi-media filters.

Three duplex Multi-media filters that are in the process of getting ready for shipment
Three Duplex Multi-Media Filters Being Prepared for Shipment
We added the following features to meet the customer's requirements:
  • UV resistant tank coating for enhanced tank life
  • Welded Schedule 10 stainless steel face piping for corrosion resistance
  • Skid mounting on stainless steel frame
  • Custom configured inlet and outlet piping locations to minimze piping between  other equipment on trailer
  • Bray butterfly valves with position indicators and limit switches
  • All valve solenoids and limit switches are wired to a single NEMA 4X stainless steel box to be interfaced with PLC which will control all equipment on the trailer
  • Resin trap on the product line of each filter to protect downstream equipment
For additonal information:

Res-Kem's Multi-Media Filter System Bulletin
Res-Kem's Complete Filtration Product Line
Res-Kem's other industrial water treatment equipment
For technical assistance and system pricing

Wednesday, January 25, 2012

Q&A on Condensate Polishers with Res-Kem’s Kevin Preising


While dirty condensate clean-up can be an energy buster in most processing plants, one cost effective solution is to polish contaminated condensate for re-use. Condensate polishers use a simple ion exchange technology that is easy to operate, easy to maintain and economical to use – less make-up water is required which leads to lower chemical and energy consumption.

Here is a brief Q&A video with Res-Kem’s Process Engineer Kevin Preising that addresses some of the most common questions about Condensate Polishers. Kevin touches on the following points:
• The difference between sodium condensate polishers and water softeners
• The life expectancy of a condensate polisher
• What plant utility services are required for condensate polishers
• Why a sub-surface wash is important
• The advantage of using a sample cooler
• The type of instruments on a condensate polisher


Res-Kem Process Engineer Kevin Preising

Wednesday, January 18, 2012

New Two Bed Demineralizer Technical Bulletins

Res-Kem has a complete 2-Bed demineralizer product line designed for industrial water production.  The standard tank sizes range from 18" to 96". 

PVC tank caoting and PVC Face Piping that is attached to a two-bed demineralizer
Two-Bed Demineralizer with
PVC Tank Coating and PVC Face Piping
These two-bed deionizers are designed for fully or semi-automatic production of water with a conductivity of less than 10 micro-ohms and feature:  
  • Flow rates from 10 - 220 gpm and capacities from 140,000 - 2,200,000 grains.
  • Strong acid 8% crosslinked cation and type 2 strong base anion resins as the standard, with other resins available as an option.
  • Microprocessor based control system with conductivity monitor and flow sensor for regeneration initiation.
  • Electrical enclosures are NEMA 4XFG corrosion resistant fiberglass, which reduces maintenance costs.
  • PVC coated steel vessels depending on size and customer requirements.
  • Optional ASME code vessels.
  • Factory assembled and skid mounted for quick installation and minimum startup cost.
  • Schedule 80 PVC piping package including air operated true union ball valves are standard. Air or electric actuated ball or butterfly valves are available as an option.
  • Pressure regulators, rotameters and metering valves supplied for accurate and safe control of regeneration water and chemical introduction.
  • Internal distributors are corrosion resistant, designed for optimum efficiency and are fully supported where required.
Technical Bulletins:
The following are the standard system sizes available from Res-Kem:

DI18072Dual 18-inch diameter demineralizer system
DI24072Dual 24-inch diameter system
DI30072Dual 30-inch diameter system
DI36072Dual 36-inch diameter system
DI42072Dual 42-inch diameter system
DI48072Dual 48-inch diameter system
DI54072Dual 54-inch diameter system
DI60072Dual 60-inch diameter system
DI66072Dual 66-inch diameter system
DI72072Dual 72-inch diameter system
DI78072Dual 78-inch diameter system
DI84072Dual 84-inch diameter system
DI90072Dual 90-inch diameter system
DI96072Dual 96-inch diameter system

For further information, please contact Res-Kem or call 800-323-1983.