Friday, September 14, 2012

Second Condensate Polishing System Shipping to a North Carolina University

Res-Kem is shipping the second of two condensate polishing systems to a leading private university in North Carolina next week.  This is the second of two systems sold to this same university in the past year and a half.  This system treats 400 gpm of dirty condensate.
Res-Kem's Dual Sodium Cycle Condensate Polisher in 316 L Stainless Steel
Res-Kem's Dual 54 inch Sodium Cycle Cycle Condensate Polishers

To improve the ROI, through energy savings, this system is designed with a separate source of cold water for backwash, brine draw and slow rinse.
What is the Res-Kem water treatment application?Sodium cycle condensate polishing to remove iron and hardness
What are the operating conditions?Flow: 400 gpm
Pressure: 30-100 psi
Temperature: 200F
Continuous
What is the system configuration?Dual tank, parallel operation 54” in diameter tanks
What ion exchange resin was used?47 cubic feet of Purolite C-150 highly cross-linked macroporous cation exchange resin in each tank
Materials of construction?316 SS ASME code with a 150 psig design pressure
316 SS Hub and Lateral
316 SS Subsurface Wash Distributor
316 SS Schedule 40 Welded face piping
Type of Valves and Actuators?Bray McCannalok Series 41 with Series 93 pneumatic actuators with manual override
Special Features?Subsurface wash
Cold water used for separate source backwash, brine draw and slow rinse
Condensate fast rinse
316 Stainless resin traps after each system

Additional Information:
Listing of Condensate Polishers Built by Res-Kem
Online Catalog of Res-Kem Condensate Polishing Equipment
Condensate Polisher Technical Bulletin
Condensate Polisher Application Checklist 
Purolite C-150 Technical Bulletin
For Technical Help From a Res-Kem Sales and Application Engineer

Friday, August 24, 2012

Amazing Craftsmanship of Condensate Polisher from Res-Kem

I need to acknowledge the excellent, American craftsmanship which goes into our condensate polishers!  It may be the engineer in me, because this is an amazing piece of work!  My kudos go to:
  • Tony, our Lead Design Engineer who had to design the vessel, the vessel penetrations, pad flanges, internal clips and its internals with amazing accuracy (and I am certain a few sleepless nights!). 
  • Shane, our Lead Assembly Person who had to go into this vessel and assemble Tony's creation, piece by piece day after day. 
This attention to detail is particularly admirable when it is likely no one will see ever see these distributors, header and laterals again! 

As we know, the things you cannot see separate the highest quality product from others.     

Condensate Polisher Internal Components in 316 L Stainless Steel from Res-Kem

 You are looking from the top of this photo to the bottom:
  • Inlet distributor
  • Brine Distributor
  • Sub-surface was distributor
  • Hub and Lateral underdrain
You have too realize everything you see takes place in a 54 inch diameter tank that is approximately 84 inches tall!  Shane had to squeeze through a 14 inch x 18 inch elliptical manway and Bill, who assisted Shane, had to give each piece to Shane through the same manway!

For more information:
Technical bulletin on Res-Kem's Condensate Polishers
Res-Kem's Condensate Polisher Portfolio Page of Recent Equipment
Checklist to Properly Size Your Condensate Polisher
If you need technical help

Friday, August 03, 2012

Growing DI Exchange Business Means Additional DI Tanks Needed

As the number of customers continues to increase for our deionized water exchange service, Res-Kem General Water continues to heavily invest in new DI (deionization) tanks and mixed bed ion exchange resin.  We just received our first of three shipments of our all stainless steel DI12 and DI30 tanks.  Res-Kem continues to have the largest fleet of stainless steel deionization exchange tanks on the East Coast.  
DI water treatment vessels received at Res-Kem
All Stainless Steel Service DI Tanks Received at Res-Kem for Growing DI Exchange Business
These exchange tanks and resin are used to produce high purity to ultrapure water for many industries including power, cogeneration, beverages, electronics, semiconductors, universities, corporate research campuses, pharmaceuticals, and manufacturers of most any type where high purity water is used in the product or touches the product.

Locations Served:
Res-Kem will use these primarily for customers in our southern region which includes New York, New Jersey, Pennsylvania, Delaware, Maryland, DC, Virginia and North Carolina out of our Aston, PA and Colonial Heights, VA locations.

Also, we have a large fleet of DI tanks serving our northern region New York, Connecticut, Massachusetts, Rhode Island, New Hampshire, Vermont, and Maine out of our New Britain, CT and Avon, MA locations.

For More Information:On Res-Kem General Water's DI Exchange Service
Technical and/or sales questions

Friday, July 27, 2012

Genetic Research Facility Will Reap the Benefits of Installing All Stainless-Steel Condensate Polisher

Kevin Preising shares how a large genetic research facility in New England will realize the benefits of a new Res-Kem single vessel Condensate Polisher. The unit will reduce the amount of iron deposits the facility was experiencing in their boiler tubes, which prolongs the life of the tubes and provides significant long-term fuel savings.
Get the full story –





For Additional Information:
For help sizing a system contact Kevin Preising
Condensate Polisher Checklist - Web Page
Condensate Polisher Checklist - Printable Version
CP Product Bulletin
View our CP System Portfolio

Friday, July 20, 2012

Greensand Filters Shipped to Western PA Water Plant

A western Pennsylvania, small private water utility, recently received four greensand filters to replace the filters that were failing.  Unable to get the original manufacturer to provide new, duplicate units, our customer found our website. 

Four New Greensand Filters with the Greensand Media Ready for Shipment to Water Utility in Pennsylvania
Four New Greensand Filters and Greensand Media Ready for Shipment to Water Utility

Because of State regulations, the systems and their operation needed to be as close to the original as possible, otherwise new permits would be required.  Since Greensand is in very, very short supply, the media was changed to Greensand Plus from the same manufacturer.  Sodium hypochlorite is used to continuously oxidize dissolved iron in the water coming into the filters.  Also, these filters are very unique because they are much shorter than we normally manufacture.  Our normal tank straightside is 60".  These tanks are 36" straightside.  

Three of the Existing Manual Greensand filters which show the tank corrosion
Three of Four Existing Manual Greensand Filters Showing Tank Corrosion

What does the company do? Public water

What is the Res-Kem water treatment application? Green sand filter to removed dissolved iron


What are the savings and/or ROI the customer wants to achieve? Not applicable.  The customer is replacing old existing system with identical system


What are the operating conditions, e.g. flow, temp, continuous, etc.? 60 gpm, Well Water Intermittent Flow

What is the system configuration, e.g. # of tanks, standby units, etc.? Four greensand filters in parallel operation


Materials of construction of tanks, piping, valves, frame, etc.? ASME Code Steel Tanks, 6’ Diameter X 36” Shell straight-side , PVC glued with manual ball valves


Type of valves and actuators? Manual ball valves


Control philosophy? Backwash as required based upon differential pressure

Special Features? Short fat tanks, required to fit tight area

For Additional Information:
Greensand Filter Technical Bulletin
Greensand Plus Technical Data
For help sizing a new filter
For help repairing or rebedding a Greensand Filter

Tuesday, June 26, 2012

Dual Parallel Condensate Polisher Will Help Large New York University Prolong Life of New Boiler


A well-known university in upstate New York that was in need of a Condensate Polisher recently reached out to Res-Kem for help. Kevin Preising discusses how Res-Kem worked closely with the university’s chief engineer and another local firm to help specify and size the unit, which will help prolong the life of the university’s new boiler.
Listen now –



For Additional Information:
For help sizing a system contact Kevin Preising
CP Checklist - Web Page
CP Checklist - Printable Version
Condensate Polisher Bulletin
View our Condensate Polisher Portfolio

Friday, June 15, 2012

Iron and Manganese Removal Filter Shipped to Westchester County HQ

Res-Kem recently shipped a 52 gpm dual tank greensand filter to a Westchester County New York corporate headquarters campus.  This filter uses greensand to remove dissolved and precipitated iron and manganese from the water coming from the local public water system.

Dual 36 inch greensand filters with bray thirty-one valves and bray series ninety-three pneumatic actuators
Dual 36" Greensand Filters with
Bray 31 Valves and Bray Series 93 Pneumatic Actuators
Water Problem:

At a Westchester County corporate headquarters campus, about 4 to 5 times a year, our customer experiences water quality and quantity problems. The campus receives its water from a local public water supplier. High levels of iron and manganese are present within the public water distribution system, and peak flow events such as hydrant flushing or firefighting activities have caused brown water to be drawn into their water system. What exacerbates the problem is the campus is at the end of the water distribution system without looping.

Therefore, iron and manganese laden sediment accumulates the piping and is drawn into the campus drinking water system. Res-Kem designed and constructed a filtration system to remove iron and manganese from the drinking water, as well as a storage tank. The volume of the tank is 150,000 gallons which provides two days of storage in the event of a water emergency with the water supply.


System Solution:

Inlet Iron and Manganese:
  • Average Inlet Iron 0.22 mg/l
  • Average Inlet Manganese 0.11 mg/ml
Flow Operating Conditions:
Typical: 52 gpm typical
System Configuration: 
  • Dual Parallel 36" diameter ASME Code, carbon steel tanks Epoxy Lined, NSF 61 certified
  • Schedule 80 PVC face piping
  • Differential Pressure Switch initiated backwash
  • Greensand Plus filtration media
Control Valves:
Bray Series 31 valves with Bray Series 93 actuators
System Operation:
Differential Pressure Switch initiates backwash cycle
Added Features: 
  • Domestic water booster pumping system brings filtered water backwash to system
  • Sodium Hypochlorite (NaOCL) serves as the chemical oxidant for the removal of iron and manganese in the filtration system. The NaOCL will be injected immediately upstream on the system influent piping header. Chemical dose will flow paced based from the signal from the filtration systems influent flow meter.

For Additional Information:
Technical bulletin on Res-Kem's Greensand/Greensand Plus filters
Online catalog for Greensand Filter Systems
Technical bulletin on Greensand Plus filtration media for iron and manganese removal

Tuesday, May 29, 2012

Condensate Polisher Install Saves University Big Bucks on Annual Boiler Maintenance

Kevin Preising discusses how the installation of a Condensate Polisher at a large midwestern university allowed them to meet ASME guidelines for boiler feedwater and significantly reduce the amount of time and money spent on annual cleaning of their boiler system.

Friday, May 25, 2012

Maximize Your Cost Savings With a Properly Sized Sodium Cycle Condensate Polisher


Res-Kem’s Process Engineer Kevin Preising discusses their Boiler Feedwater Checklist and the 15 questions that will help properly size a Sodium Cycle Condensate Polisher (and generate the most payback) for your steam plant.  Please print out the checklist and follow along!

Friday, May 18, 2012

Dealkalizer Shipped to University in Massachusetts

A triple dealkalizer was shipped this week is the last major piece of equipment for a major steam boiler upgrade at a university in Cambridge, Massachusetts which included a new condensate polisher system Res-Kem provided, a deaerator and other major physical plant upgrades.  The months between the polisher shipment and the dealkalizer shipment were filled with activity in the steam plant.

A triple dealkalizer system being prepared and about ready for shipment
Triple Dealkalizer System Being Prepared for Shipment
The shipment of the dealkalizer had to wait several months because the condensate polisher had to be moved into place, installed and started up.  Once this was completed, the deaerator was delivered and required installation and start up.  After that, the entire revamped boiler treatment system had to be tested, operating correctly and then operators needed to be trained.  Once everything was proven out to the satisfaction of the university, the old condensate polisher could be scrapped and the piping prepared for our dealkalizer which will be placed in the same location where the CP was.   

What a dealkalizer does:
A dealkalizer removes Alkalinity which breaks down in the boiler and generates CO2 and carbonic acid (H2CO3) in the condensate.  The removing of CO2 and Carbonic acid reduces corrosion rates within the condensate piping
Inlet alkalinity:
Average inlet M-Alkalinity- 40 ppm- 50 ppm
Savings the customer wants to achieve:
• Reduced Corrosion of steam condensate return piping
• Lower return condensate iron levels in boiler feedwater and cleaner boiler tube surfaces
• Lower Operating expenses on fuel with cleaner boiler tubes
• Eliminating alkalinity via the dealkalizer allows for higher boiler cycles of concentration and lower fuel costs
Flow Operating Conditions:
Typical: 140 gpm typical
Peak: 200 gpm
Minimum: 40 gpm
System Configuration: 
• Triple 42 " diameter X 72" ASME Code fiberglass tanks
• Each tank has a front mounted/supported Pentair Fleck 3900 valve with NXT controller
• All Interconnecting pipe is Schedule 80 PVC piping
• Each tank is individually skid mounted
Control Valves:
Multi-Port Fleck 3900 valves side mounted and supported via welded steel frame
System Operation:
Progressive Flow and Demand Flow operations
Added Features: 
Contacts on the Fleck valve indicate to the DCS that the unit is in operation, standby, or regeneration   

Additional Information:
Technical bulletin for Res-Kem's dealkalizer equipment