Here are some pictures of an interesting project our team out of our Jacksonville, Florida warehouse and assembly facility recently configured for a well driller customer. The system was designed to treat brackish/salt water from an ocean front property. As you can see, given the complexity of the water problem and limited space, the equipment was squeezed into a small space.
System Description:
This house is right on the ocean, pulling salt water in from a well. The house is very close to Marineland, Florida (The home of Flipper!) .
As expected, the well has a high Total Dissolved Solids, TDS, value. Also, the water had a "rotten egg", Hydrogen Sulfide, H2S, smell.
The equipment is as follows:
Well pump and tank
Hydrogen Peroxide injection system with Stenner PCM 5 controller and Hayes meter to correct the Hydrogen Sulfide, H2S, in the incoming brine/salt water
Whole house carbon filter with backwash system
Twin tank Fleck 9100 softener system for continuous treated water even during regeneration
10 micron prefilter
Whole house RO system rated for 1800 GPD
500 gallon atmospheric storage with level switches for pump protection
Repressurization pump and tank for house feed water
Fleck 5600 backwash polishing filter for pH and taste control
Hydrosafe 12 gpm UV Light with stainless steel housing for bacteria control activated with flow switch.
References:DT Series Softener BrochureDT Series Softener Engineering Drawing
1 comment:
nice post. thanks.
Post a Comment