Showing posts with label UV TOC Destruction. Show all posts
Showing posts with label UV TOC Destruction. Show all posts

Thursday, November 21, 2013

Critical Safe Equipment Operation & Maintenance Reminder From Aquafine UV

On November 13, we received a bulletin from Aquafine stating this precaution:  "This bulletin is a reminder of the potential risk of an unsafe condition arising due to sleeve bolt failure and quartz sleeve ejection if the unit is not properly maintained and/or safety guidelines are not followed. In order to ensure safe operation, it is essential that your personnel observe all the safety precautions set out in the O&M manual at all times".

 
"The sleeve bolts used on the SwiftBeverage, TrojanUVFit, TrojanUVLogic, TrojanUVPhox, TrojanUVSwiftSC and UVK 1000-30000 series of products can potentially fail, and should be inspected annually and replaced if a defect is noted."
 
Please locate the above listed UV systems in your facilities.  Have trained personnel inspect and replace parts as appropriate.
 
Additional Information:
Product Safety Bulletin AQ111313 from Aquafine
Critical Safe Equipment Reminder Letter
Need a trained technician to inspect your UV system

Thursday, April 16, 2009

Patented UV Technology Reduces Size and Energy Costs of UV Disinfection

Brand A 50 gpm vs. UVSI 50 gpm system-UVS228S-50.  Note even the Control Unit is 1/4th the size.
Res-Kem is now handling the newly patented UV light by UV Sciences. This revolutionary new UV unit has highly efficient UV reaction chambers for water disinfection. The flow chamber maximizes the delivery of the ultraviolet energy into the water stream effectively increasing efficiency 3 to 7 times when compared to an equivalent flow rate system.

Conventional UV chambers absorb the UV light energy and create heat. Instead of the UV energy, photons, being absorbed by the housing chamber generating heat, the photons are kept in the water medium. This keeps the photon active until it finally absorbed by a microbe or chemical molecule such as TOC, or chloramine. To maintain an effective UV disinfection dose, it is necessary to have a uniform flow rate. UV Sciences engineers used fluid dynamics modeling tools to optimize the flow tube, and designed a UV chamber that has a uniform flow rate.
Energy consumption comparisions between UV Sciences ultraviolet units and Brand A from 50 gpm to 500 gpm
The result is a compact and energy efficient UV disinfection unit. The 500 gpm unit chamber is 4 inches in diameter and only 40 inches long. These UV units offer the smallest size and lowest cost of ownership in the industry.