Mighty Little Chemical Pump-Stenner ECON FP

What fits in the palm of your hand an can pump up to 30 GDP at 80 psi?  The new Stenner ECON FP pump!   The ECON FP is an extremely versatile chemical pump. 

What makes this pump special?

• This one little pump can receive signals from either 24VAC, dry contact signal, or flow switch.
• The Pump Control Module (PCM) is built in.
• All wires are color coded for easy installation. 
• The control panel is an easy to read back lit LCD.  
• Also, it could be the safest Chemical on earth.  Why?  Normally, chemical pumps need 120-220 volts to operate. Not the FP!  Since it can accept low voltage or dry contact signals so your risk of electric shock is greatly reduced. 
• The FP has a DC motor and electronic circuitry eliminating all the moving clutch parts found in the Classic Stenners. 

Note to plumbers Well Drillers and Water treatment professionals: 
NO MORE Jerry rigging the well switch for power.   Don't get me wrong, you still need to plug into 120 volt power, but not 220 volt.  The FP's signal options gives the installer safer power sources.  Water Treatment professionals rejoice! 

Selling Clack, Culligan, Eco-Water or Pentair products?
The FP will interface with the newer high end electronics available with these companies.  YES!  Just plug in the FP to your water softener valve, program the electronics, and the FP will run!  
What makes this pump special?


What else makes this pump so special? 

• Even more, better, is the new tube housing assembly. Tube change outs are a breeze. Just snap off the cover and install the tube, return the cover over the tube and start pumping! 
• Even more, more better, the FP is Stock Item.
• Even most better, the FP costs about 35% less than a Classic Stenner combined with a PCM. 

Please note Res-Kem is a business to business company.

Please contact us at 800-323-1983 or sales@reskem.com for a product bulletin

Stenner Quick Pro Eliminates Black Finger Nails

Have you ever tried to change a peristaltic chemical feed pump tube? Without practice it was not a simple task. Tube changes usually resulted in pinched fingers and neglected maintenance. The Stenner pump company recognized the problem and recently released the Quick Pro pump head design. The Quick Pro allows you to collapse the "pinch rollers" and simply remove and replace the new tube. This video link shows how easy a Quick Pro tube change will be.

Have an old pump? The good news is you can retro fit old style tube housings with the Quick Pro. Just order part # PMPCMPQP10_ -1 . Add your tube number in the blank space after the QP10_-1. Upgrade your next tube change with Quick Pro.

If you have any questions, give us a call at 800-323-1983 or email us.