On a recent sales call to a local dialysis clinic, the biomedical technician
complained about a distinct loss of capacity in his water softener. Asking the
typical diagnostic questions, such as resin age, brine system inspection, the
Bio Med told me they recently upgraded their Reverse Osmosis machine and they
are using considerably more water. End of story correct; more water used, more regenerations required? Well No. We ran the
numbers and still concluded he was regenerating the softener too often. Something
else was wrong.
Tank X-RAY
I had one last trick up my sleeve. “The Tank X-Ray”. Yes, folks, you can
X-Ray a softener tank with a 500 watt halogen work light as sold in many home
improvement stores. The X-Ray process is easy; you darken the room, turn on the
light, and press it against the upper 1/2 of the tank. Now, this only works
with a natural color fiberglass mineral tank. The bright light will not
penetrate a painted tank. The light will let you gaze at the insides of the
tank. Everything will appear as shadows.
What we discovered here was the resin beads were all bunched up to one side
of the tank. NOT GOOD. The resin should appear as an even, level, dark line
across the whole diameter of the tank. AH HA! This tank was suffering from a
little known chronic problem called “Diffusion Exclusion”. Someone forgot to
include the Inlet Diffuser/Disperser. The inlet diffuser is an option offered with the
new control valve that regulates the resin regeneration process. This small
critical part is often discarded as unidentifiable.
 |
| Pentair Fleck 2859 Valve Without Inlet Diffuser/Disperser Installed |
 |
| Don't Throw Away the Plastic Inlet Diffuser/Disperser on Left! |
 |
| Penatir Fleck 19608-15 Inlet Diffuser/Disperser Installed on Pentair Fleck 2850 Valve |
The inlet diffuser is attached to the underside of the control valve during
tank assembly. Its main purpose it to diffuse the path of the water flowing
into the resin bed during the DOWN FLOW service cycle. The diffuser forces the
water evenly outside, then down. Without the diffuser, the water path is
straight down. The result is a drilling effect. The drilling gets worse as the
flow increases.
Two bad things happen:
- The resin is usually blasted and gets bunched up.
- You lose efficiency at high flow because the water isn't flowing evenly through the resin bed, it's drilling past it.
In Conclusion:
Avoid Tank Turmoil. X-Ray your
tank. It’s actually fun to do. Even more fun is to start your softener into a
regeneration cycle and watch your resin expand upward during backwash and float
around like lava, then see it settle down during the rinse cycles.
For More Information:
To Buy Fleck Valve Parts Use Our Interactive Drawings
Links to Industrial and Commercial Water Softener information and bulletins
